This website uses cookies to ensure you have the best experience. Learn more

Corrosion In Heat Exchangers Essay

2159 words - 9 pages

Corrosion in Heat ExchangersTable of ContentsIntroduction.........................................................3Corrosion Problems..............................................6References.........................................................15Section 1IntroductionHeat exchangers are commonly used to transfer heat from steam, water, or gases, to gases, or liquids. Some of the criteria for selecting materials used for heat exchangers are corrosion resistance, strength, heat conduction, and cost. Corrosion resistance is frequently a difficult criterion to meet. Damage to heat exchangers is frequently difficult to avoid.There are many variables related to specifying heat exchangers -- for example, temperatures, flow rates, pressure drop and heat transfer -- that are common to all types. There also are some variables that are specific to specifying a plate heat exchanger -- in particular, the number of passes.The main components of the plate heat exchanger include:· Plate Pack. The plate pack is composed of a number of corrugated heat transfer plates according to the heat transfer surface required. The plate corrugations provide support between plates and encourage turbulence, which gives the plate heat exchanger its high heat transfer.· Gaskets. The molded elastomeric gaskets on the plates ensure that the flow channels are sealed securely from each other, preventing cross-contamination. The gaskets also determine the direction of flow within the exchanger.· Frame. The frame provides structural support and pressure containment by enclosing the plate pack. The main frame components consist of a fixed end, a movable end, upper and lower carrying bars, and tightening bolts.· Connections. The connections for incoming and outgoing media usually are found in the fixed end plate. In the case of a multiple-pass design, connections also are found on the movable end.The plate heat exchanger is well known as one of the most efficient heat exchanger designs. Its basic concept - using corrugated plates for heat transfer - was introduced in the early 1930s for the food and dairy industry. Since then, plates have gone through tremendous development and now are used as standard equipment in many chemical processes.The hallmarks of plate heat exchanger operation are high heat transfer efficiency, compact size, design flexibility, low fouling (as a result of plate pattern turbulence) and low lifecycle cost. A typical heat transfer coefficient for a plate heat exchanger may be four to five times higher than that of a shell and tube design. The compact heat transfer area in a plate heat exchanger results in an efficient design with space requirements as low as 10% of a typical shell and tube design. Some designs employ a modular approach that allows each part of the plate heat exchanger to be changed as needed. With these designs, adding or removing plates for a new duty or changing frame parts to accommodate expanded capacity...

Find Another Essay On Corrosion in Heat Exchangers

Heat Exchangers Essay

947 words - 4 pages . The energy balances for the runs in the other exchangers are similarly satisfied, as seen in Tables 4.1 and 4.2. The fact that the energy balances are satisfied allows confidence to be placed in the data obtained throughout the experiment. This, in turn, allows confidence to be placed in the scale-up. Analysis of the Wilson Plots The Wilson Plot method makes use of the fact that when the velocity of the hot fluid in a heat exchanger is

Pipe corrosion Essay

970 words - 4 pages capitol costs and production down time. Failure due to pipe corrosion is sometimes unexpected. For example, if corrosion in a high-pressure steam system is not regularly monitored, then a fitting could fail. This is a safety concern because an unexpected failure such as this could cause a serious burn. Less direct safety issues involving pipe corrosion could involve a decrease in performance in a unit operation. For example, a heat exchanger might


1525 words - 7 pages performance, compared to its predecessor 321 stainless steel. One other example of applications in the chemical processing industry would be Hastelloy® G-30 for heat exchangers to reclaim spent sulfuric acid at 60-90oC, which has replaced the use of graphite as this did not provide maintenance free service. Works Cited 1. Haynes International, Available at: (Accessed: 24th February 2014). – most information came from

The Application of Aluminium in Automobile Sector

2076 words - 8 pages , pneumatic systems, seat frames,sumps and side impact panels etc. Aluminium alloys are also utilized extremely in case of heat exchangers. Up to 1970, in sector of automobile it was normally observed that heaters and radiators were made by brass and copper with the help of soldered joints. During the crisis of oil in the year of 1974, triggered were designed in order to form the structure of lighter weight and to meet this aliminium metal were used

Pinch Analysis, Entropy and Future Retrofit

1535 words - 7 pages . The different is from high entropy, more disorder, which is produced from high energy qualities. Furthermore, the total area of the networks also will vary with the use of different utilities. Because high entropy lead to have higher temperature differences in some heat exchangers, hence less area Case study: The objective of this case study is to show the change of total entropy when different types of utility used i.e. LP steam, MP steam and HP

Pinch Analysis, Entropy and Future Retrofit

1996 words - 8 pages focus on using entropy along with pinch analysis to design a heat exchangers network that is applicable for for today and future retrofits. and applying the second law of thermodynamics . Pinch Analysis: Pinch technology is a technology that provides a systematic methodology for energy saving in processes and plants. The methodology based onuses first low law and second law of thermodynamic, energy is conserved, and energy transfers from hot

Controllability analysis based on input-output pairing and disturbance rejection of a distillation column assisted heat pump in steady-state condi

970 words - 4 pages Distillation is the main separation method in chemical process industries. This process involves low thermodynamic efficiency and high energy demand due to the heat that is added in the bottom reboiler and thrown away in the top condenser. For this reason, to improve energy-efficient distillation systems, heat integration concept was first proposed by Brugma [1], Wright [2], Petlyuk et al.[3] and Freshwater [4,5] almost 70 years ago. Nakaiwa et

Pinch Analysis

1144 words - 5 pages network will have constant total entropy when they use same type and amount of utilities. On the other hand, the entropy will vary for networks having different types and amount of utilities. The networks’ entropy that is used high energy qualities is higher than the one that used low energy qualities. The changes come from using high energy qualities, and this lead to have higher temperature different in some heat exchangers, hence high entropy. Due

The Saving of Energy

1736 words - 7 pages stores A thermal store is a form of storing and managing renewable heat until necessary. In a domestic environment, the hot water is usually stored in a large well-insulated cylinder frequently called a buffer or accumulator tank. A thermal store can contain one or more heat exchangers, typically in the form of internal helical pipes or external flat-plate heat exchangers. It can also include an electrical heating element, such as an immersion

Water Carrying Concrete Core

1110 words - 5 pages different zones. Heat exchangers are distributed for each zone with different sizes according to the zone size and a radiator for each room is supplied with different sizes according to the room sizes. The minimum distance between tubes that could be reached is 10 centimeters due to production reasons, so in special cases in summer due to this limitation factor, the required room temperature is not achieved so additional measures should be taken

Wasteform for Low Level Waste

2424 words - 10 pages should be as low as possible to reduce the possibility of leaching. After closure of GDF, when the wasteforms are conditioned with an inflow of groundwater, additional reactions (as shown in above equations) occur. The physical integrity of wasteform is preserved. Meanwhile, any oxygen remained from operational phase would be removed rapidly by corrosion of the package. It can also be seen from the equation that Calcium hydroxide is produced, giving

Similar Essays

Internal Corrosion Essay

1855 words - 8 pages mains, and heat exchangers. They often occur in areas where conventional corrosion is thought to be under control and most problems are localised, resulting in pitting attacks. The corrosive attacks develop favourably under deposits, and are therefore more frequently met in low-flow conditions or stagnant dead-legs (Cescor, 2010) According to Roland J. Huggins, in a general view, MIC can be in one of two groups based upon their oxygen

Various Kinds Of Heat Exchangers Analysis

1122 words - 4 pages cooled, while the cool incoming air stream is passed through the condenser. Although, heat pipes are levelheaded heat exchangers, if the condition of the air is in such a way that condensation happens on the fins, there may be some transfer of latent heat, leading to improved efficiency. The working fluids in heat pipes, normally Class I refrigerants, are always selected in accordance with the preferred temperature conditions (Kroger 198). Most HVAC

Ammonia Cooling Heat Exchanger Replacement Essay

590 words - 2 pages FROM: Team DeltaDATE: 4/20/05SUBJECT: Ammonia Cooling Heat Exchanger ReplacementATTACHMENTS: Calculations & DiagramA need has risen to replace the existing heat exchanger (1) for cooling ammonia vapor exiting the ammonia converter (2). In response to this need, Team Delta has designed a new system for cooling the ammonia vapor using two vertical double pipe heat exchangers

An Analysis Of The Properties Of Aluminum

1550 words - 6 pages exchangers, and automobile engine parts. It is also being used in energy saving equipment such as solar collectors. 10. Non magnetic Aluminium is not magnetic It is used in marine magnetic-compasses, parabolic antennas, computer disks, etc. 11. High reflectivity Aluminium is highly reflective of light, heat, and electric waves. The purer the metal, the more so. This feature is utilised for reflecting mirrors